Expert Insights on Installing a New Shower Unit

Apply Now

We've discovered this great article relating to How to Install a Direct-to-Stud Shower Enclosure directly below on the web and felt it made perfect sense to relate it with you here.


How to Install a One-Piece Shower Unit
A successful shower installation calls for cautious planning and a great deal of work. Most of the times, you will certainly need to do 3 kinds of jobs: mounting wall surfaces, mounting the plumbing, as well as finishing walls.

Prep work


First of all, you have to choose the sort of shower that you want to install. It is very important to ascertain whether the chosen shower can dealing with specific systems and also can regulate a safe level of water through the central heating boiler. The majority of shower units nowadays are designed to be adaptable to different water stress (such as stored warm water and also cool mains).
It is also important to take into consideration the water pressure as well as the planning of the piping and also drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower unit can be attached to the bathroom tap as per your requirement, and also the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap and exceptionally straightforward to set up. However, although the hose pipe link is basic, it is easily displaced. Furthermore, it is bothersome to change the temperature level.

  • Bath/Shower Mixer: The pipe and also spray of this sort of shower are combined with a bathroom mixer tap, as well as the temperature level can be adjusted with the bathroom faucets. It is a really economical option as well as no added plumbing is involved. Nevertheless, the bath/shower mixers additionally deal with inconvenient temperature control alternatives.

  • Guidebook Mixer: The hose as well as spray of a hands-on mixer shower system belong of the wall surface device and also the hot and cold water supplies are connected to a single shutoff The temperature level as well as pressure of the water are managed with either one or a range of handles (in much more pricey showers). Although temperature level control is a lot easier in manual mixer types, they are more expensive than the formerly stated mixers. They additionally need extra plumbing of hot and cold water supply pipelines.

  • Thermostatic Mixer: The pipe and spray of this shower kind belong of the wall surface unit and also the hot and cold water products are connected to a solitary valve below as well. It is total with an integrated stabiliser to self-adjust the water temperature and also to prevent it from coming to be too hot. Among the most significant benefits of a thermostatic mixer shower type consists of convenient temperature level control. Nonetheless, it is one of the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary unit containing a powerful electrical pump that can altering both the water pressure as well as temperature level. This type of shower can be fitted if there is supply of water from a cold water tank and a warm water cyndrical tube. A power shower makes the adjustment of both pressure and temperature level easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a mix boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply and it warms the water electrically. It is important to keep in mind that for this shower kind to be mounted, the keys pressure requires to be a minimum of 0.7 kg/sq cm (10lb/sq in). The device enables the temperature and also pressure to be adjusted using a knob. Models with temperature level stabilisers are better as they continue to be unaffected by various other taps in other places in use within the house. A major disadvantage of electric showers is that the control handle only enables the alternative of high temperatures at much less pressure, or lower temperature levels at a better stress. This is bothersome in the winter season when the spray is often weak as well as the keys water is chillier. However, this issue is taken on in some models which are offered with a winter/summer setting.

  • Technique


    Relying on the type of shower you want to set up, the shower head have to either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check valve.
    Prior to beginning, it is recommended to mark the settings of the shower head as well as control, and also to intend the pipe-work entailed. Furthermore, the water drainage system to get rid of the drainage will need to be prepared. Both positions of the cable television course and the shower button will certainly also require to be considered if an immediate or electric shower system is being mounted.
    Make use of the instruction guide offered with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is essential to cut off the water system. In order to protect the pipes, they should be given a water resistant covering as well as additionally fitted with separating valves. The pipes can then be buried into the wall as well as smudged over to neaten the overall look.
    Fit the base tray, shower head, as well as installations.
    Attach the major shower control to the pipes that will certainly be supplying the water (This might call for a women screw thread adapter).
    Reconnect the water and examination the pipelines for any leaks, as some might need tightening up.
    If you are setting up an electric shower, remember to switch off the electricity supply before making any type of electrical links. As soon as these links have actually been made (there need to be guidance within the instruction manual), the power supply can be switched back on.

    Adjusting Water Pressure to Fit Your Shower


    The cold water tank can be lifted to a higher height (in some cases just 150mm (6inches)) by fitting a solid wooden support underneath it - perhaps made up of struts and also blockboards. If you choose this option, the main as well as distribution pipes will likewise have to be elevated to fulfill the new height of the storage tank.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be connected right into the power supply in order to operate.

    Piping and also Drainage


    It is best to make use of 15mm size supply pipelines, and make the runs to the shower as short and also straight as possible so as to keep optimal stress as well as reduce warm loss. Furthermore, by minimising making use of elbow joints for pipe edges, you can reduce the resistance in the flow of the water supply. You can attain this by bending the pipelines rather.

    A Lot Of Typical Blunders


  • Breaking or disregarding local code restrictions.

  • Utilizing pipelines that are as well tiny.

  • Attaching copper to galvanized without using a brass or dielectric suitable in between both.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when installing them.

  • Not installing an air gap filling for components.

  • Reducing supply stub outs too short to install the shutoff valves onto after the ended up wall surface is in place.

  • Not correctly lining up tubing right into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will cause a leak.).

  • When turning the water back on in your house, always run the outside pipe shutoff or purge your bathrooms to hemorrhage dust and air from the lines. This debris can trigger issues in your sink faucets and also various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    I hope you enjoyed our post on How to Install a One-Piece Shower Unit. Many thanks for taking the time to read through our piece of content. Enjoyed our review? Please share it. Let someone else locate it. Thank you so much for your time invested reading it.


    Course Detail

    Leave a Reply

    Your email address will not be published. Required fields are marked *